a dual input transmitter, temperature compensation items appear for the other
sensor. Only four items are shown at a time. To view the remaining items, scroll to
the bottom of the screen and continue scrolling.
4. To make a change, move the cursor to the desired line and press ENTER.
A screen appears in which the present setting can be edited.
5.
To store a setting, press ENTER.
For an explanation of terms, see Section 7.6.1 and Section 7.6.2.
6. To return to the main display, press MENU and then EXIT.
7.7 Configuring security settings
7.7.1 Purpose
This section describes how to set security codes. There are three levels of security.
1. A user can view the default display and diagnostic screens only.
2. A user has access to the calibration and hold menus only.
3. A user has access to all menus.
The security code is a three digit number. The table shows what happens when different
security codes (XXX and YYY) are assigned to Calibration/Hold and All. 000 means no security.
Calibration/Hold All What happens
000 XXX User enters XXX and has access to all
menus.
XXX YYY User enters XXX and has access to Cali-
bration and Hold menus only. User en-
ters YYY and has access to all menus.
XXX 000 User needs no security code to have
access to all menus.
000 000 User needs no security code to have
access to all menus.
Programming the transmitter
Instruction Manual 55
To Next Page
Loading...
