EMKO TRANS MINI AUTO - Oil Pressure Input Type; Temperature Input Type; Temperature Sensor Break; Configurable Analog Input Type

OilPressureInputType
0 NOTUSED:
1 DIGITAL NC:
2 DIGITAL NO:
3,4,5,6,7,8and9:
USERCONFIGURED"
TemperatureInputType
0 NOTUSED:
1 DIGITAL NC:
2 DIGITAL NO:
3,4,5,6,7and8:
8 USERCONFIGURED"
TemperatureSensorBreak
:
ENABLE:
0 NOTUSED:
1 DIGITAL NC:
2 DIGITAL NO:
3,4,5,6,7and8:
8 USER
ThissectionisusedtoconfiguretheOilPressuresenderinput.
TheOilPressureinputwillnotbemonitored.
TheOilpressureinputisfedfromanenginemounteddigitalpressureswitch. This
switchreturnsaclosedsignalduringlowoilpressureconditions(andengineatrest),onceoilpressure
isestablishedtheswitchwillopen.
TheOilpressureinputisfedfromanenginemounteddigitalpressureswitch. This
switchreturnsanopensignalduringlowoilpressureconditions(andengineatrest),onceoilpressure
isestablishedtheswitchwillclose.
Oilpressureinputisconnectedtoaresistivetypeenginemountedoilpressure
transducer.Ifthisparameterselectedas"9 ,theusercaninputthedata
manuallyaccordingtothesensorcurve.
ThissectionisusedtoconfiguretheCoolant Temperaturesenderinput.
TheCoolant Temperatureinputwillnotbemonitored.
TheCoolant Temperatureinputisfedfromanenginemounteddigitaltemperature
switch. Thisswitchreturnsaclosedsignalduringlowtemperature,shouldthetemperatureriseabove
theswitchmanifacturerstrippointtheswitchcontactwillopen.
TheCoolant Temperatureinputisfedfromanenginemounteddigitaltemperature
switch. Thisswitchreturnsanopensignalduringlowtemperature,shouldthetemperatureriseabove
theswitchmanifacturerstrippointtheswitchcontactwillclose.
TheCoolant Temperatureinputisconnectedtoaresistivetypeenginemounted
temperaturetransducer.Ifthisparameterselectedas" ,theusercaninputthe
datamanuallyaccordingtothesensorcurve.
TheCoolant Temperaturesensorbreakwillnotbemonitored.
TheCoolant Temperaturesensorbreakwillbemonitorediftheenginerunsatleast3
minutes.
Thissectionisusedtoconfigurethe senderinput.
The willnotbemonitored.
open
The inputisconnectedtoaresistivetypeengine
mountedlevel/temperature/pressuretransducer.Ifthisparameterselectedas"
forlow .
closeforlow .
-
-
-
-
-
-
-
-
DISABLE
-
-
-
-
Configurable AnalogInputType
Configurable AnalogInput
Configurable AnalogInput
Configurable AnalogInput
Configurable AnalogInput
Configurable AnalogInput
39