Endress+Hauser Cerabar M PMC41 - Page 40

Cerabar M
40 Endress+Hauser
Universal process adapter
P01-PMC45xxx-06-09-xx-xx-009
Process connection PMC45, version HA: universal process adapter, PN 10, material AISI 316L/1.4435, EHEDG
A silicone molded seal is enclosed with the process connection (viton on request).
Welding neck for universal process adapter
P01-PMC45xxx-06-xx-xx-xx-000
Welding nozzle
P01-PMC45xxx-06-09-xx-xx-002
Version XU: welding nozzle 75 mm, material AISI 316L
ø43.5
ø63
max.178.5
Diameter D Material Order number
65 mm AISI 316L 214880-0002
65 mm AISI 316L with inspection certificate EN 10204 3.1 material 52010174
85 mm AISI 316L 52006262
85 mm AISI 316L with inspection certificate EN 10204 3.1 material 52010173
ø44
39.5
Rd 52 x 1/6
D
ø64.9
ø52
ø74.9
ø42
8.4
19.5
10
14
153.5 (173.5)
163.5 (178.5)
4 x 90° (=360°)