Cerabar M
68 Endress+Hauser
B0.2% see additional specification
C0.1% see additional specification
D DKD certificate; see additional specification
9 Special version, to be specified
50 Output; Operation:
A 4 to 20 mA analog; without display
C 4 to 20 mA analog; display bar graph
H 4 to 20 mA SIL HART; without display
J 4 to 20 mA SIL HART; display 4-digit + bar graph
P PROFIBUS PA; without display
R PROFIBUS PA; display 4-digit + bar graph
W Without electronics; without display
Y Special version, to be specified
60 Additional option:
1 Basic version
2 Mounting bracket, wall/pipe
B SIL + EN10204-3.1 material (process connection) inspection certificate SIL Declaration of
Conformity
C EN10204-3.1 material (process connection) inspection certificate
S GL (German Lloyd) marine certificate
U SIL Declaration of Conformity
Y Special version, to be specified
70 Process connection:
Threaded connection
1M Thread ISO228 G1/2, 316L (CRN)
2M Thread ISO228 G1/2, Alloy C (CRN)
1R Thread ISO228 G1/2 hole 11.4 mm, 316L (CRN)
1P Thread ISO228 G1/2 G1/4 (female), 316L (CRN)
1A Thread ANSI MNPT 1/2 hole 11.4 mm, 316L (CRN)
1N Thread ANSI MNPT 1/2 FNPT1/4, 316L (CRN)
2N Thread ANSI MNPT 1/2 FNPT1/4 , Alloy C (CRN)
1S Thread JIS B0202 G1/2 (male), 316L
1K Thread JIS B0203 R1/2 (male) hole 11.4 mm, 316L
1T Thread DIN 13 M20x1.5, AISI 316L
9Y Special version, to be specified
80 Sensor seal:
1 FKM Viton
2NBR
4EPDM
CChemraz
7Kalrez
M Kalrez, cleaned for silicone-free service
A FKM Viton, cleaned from oil + grease
L FKM Viton, cleaned for silicone-free service
6 FKM Viton, oxygen service
2
note application limits pressure/temp
9 Special version, to be specified
PMC41 Complete order code
40 Calibration; Unit:
To Next Page
Loading...
