Operation Cerabar S PMP71 with 4 to 20 mA HART
26 Endress+Hauser
5.4.2 Selecting an option
Example: selecting "English" as the language of the menu.
5.4.3 Editing a value
Example: adjusting DAMPING VALUE function from 2.0 s to 30.0 s.
→ ä 23, "Function of the operating elements – onsite display connected".
Onsite display Operation
P01-xxxxxxxx-19-xx-xx-xx-017
German is selected as the language. A ✓in front of the
menu text indicates the active option.
P01-xxxxxxxx-19-xx-xx-xx-033
Select English with "+" or "–".
P01-xxxxxxxx-19-xx-xx-xx-034
1. Confirm your choice with "E" . A ✓in front of the
menu text indicates the active option. (English is now
selected as the menu language.)
2. Jump to the next item with "E" .
Onsite display Operation
P01-xxxxxxxx-19-xx-xx-xx-023
The onsite display shows the parameter to be changed. The
value highlighted in black can be changed. The "s" unit is
fixed and cannot be changed.
P01-xxxxxxxx-19-xx-xx-xx-027
1. Press "+" or "–" to get to the editing mode.
2. The first digit is highlighted in black.
P01-xxxxxxxx-19-xx-xx-xx-028
1. Use "+" to change "2" to "3".
2. Confirm "3" with "E". The cursor jumps to the next
position (highlighted in black).
P01-xxxxxxxx-19-xx-xx-xx-029
The decimal point is highlighted in black, i.e. you can now
edit it.
P01-xxxxxxxx-19-xx-xx-xx-030
1. Keep pressing "+" or "–" until "0" is displayed.
2. Confirm "0" with "E".
The cursor goes to the next position. ↵ is displayed and
highlighted in black. → See next graphic.
To Next Page
Loading...
