Endress+Hauser Cerabar S PMP71 with MID Part Certificate - Page 8

Identification Cerabar S PMP71 with 4 to 20 mA HART
8 Endress+Hauser
Hygienic stainless steel housing (T17)
P01-XMX7Xxxx-18-xx-xx-xx-001
Fig. 5: Nameplate
1 Device name
2 Manufacturer's address
3 Order code
See the specifications on the order confirmation for the meanings of the individual letters and digits.
4 Serial number
5 MWP (Maximum working pressure)
6 Symbol: Note: pay particular attention to the data in "Technical Information"!
7 Minimum/maximum span
8 Nominal measuring range
9 Electronic version (output signal)
10 Supply voltage
11 Wetted materials
12 Type of protection
Optional:
13 Approval marks and ID numbers
14 3A symbol
15 CSA symbol
16 FM symbol
17 SIL symbol for devices with SIL3/IEC 61508 Declaration of Conformity
18 GL symbol for GL marine certificate
19 EC type-examination certificate
20 Type of protection
21 Approval number for WHG overfill protection
22 Temperature operating range for devices for use in hazardous areas
23 Electrical data for devices for use in hazardous areas
24 Safety Instructions number
25 Safety Instructions index
26 Date of device manufacture
27 Maximum temperature for devices suitable for oxygen applications
28 Maximum pressure for devices suitable for oxygen applications
2.1.2 Identifying the sensor type
See parameter "Sensor Meas.Type" in Operating Instructions BA00413P.
Operating Instructions BA00413P can be found on the supplied CD.
15
Pmax
Tmax
Bei Sauerstoffeinsatz/for oxygen service:
Order Code:
Ser.-No.:
MWP
Span
U=
Mat.
1
3
4
6
7
8
9 10
11
12
13
13
13
14
5
16
17
-
Dat.:
19
21
20
22
23
24
25
26
27
28
2
18