Endress+Hauser Deltabar FMD72 - Diagnosis Measured Values

Deltabar FMD71, FMD72 Description of Device Parameters
Endress+Hauser 105
14.16 Diagnosis → Measured Values
Level before lin. (019)
Navigation Setup → Level before lin. (019)
Setup → Extended setup → Level→ Level before lin. (019)
Diagnosis → Measured values→ Level before lin. (019)
Write permission No write permissions. Parameter is read only.
Description Displays the level value prior to linearization.
Tank content (043)
Navigation Setup → Extended setup → Linearization → Tank content (043)
Diagnosis → Measured values → Tank content (043)
Write permission Operators/Service engineers/Expert
Description Displays the level value after linearization.
Meas.Diff.Press. (020)
Navigation Setup → Meas.Diff.Press. (020)
Diagnosis → Measured values → Meas.Diff.Press. (020)
Write permission No write permissions. Parameter is read only.
Description Displays the measured differential pressure after sensor trim, position adjustment and
damping.
Sensor
pressure LP
Measured
pressure LP
↑ ↑
LP →
Sensor
calibration LP
→
Sensor trim LP
→
Pressure
simulation LP
Corrected
pressure
Pressure after
damping
Measured
differential
pressure
↓
↑ ↑ ↑
Differential
pressure +
pressure
inversion
→
Position
adjustment
(calib. offset)
→
Differential
pressure
simulation
→ Damping → P
↑
HP →
Sensor
calibration HP
→
Sensor trim
HP
→
Pressure
simulation HP