Deltapilot S
Endress+Hauser 35
Certificates and approvals
CE mark The device meets the legal requirements of the EC directives. Endress+Hauser confirms that the device has
been successfully tested by applying the CE mark.
Ex approvals All explosion protection data are given in separate documentation which is available upon request. The Ex
documentation is supplied as standard with all devices approved for use in explosion hazardous areas.
ā See also Page 59 ff, "Safety Instructions" and "Installation/Control Drawings" sections.
Overfill protection WHG (German Water Resources Act)
Seismic test DB53 with FEB22 electronic insert passed in accordance with IEEE 344-1987.
Marine approval DB50, DB50L, DB52 and DB53 with FEB17 electronic insert:
German Lloyd, certificate No.: 99350 - 97 HH
Standards and guidelines DIN EN 60770 (IEC 60770):
Transmitters for controlling in systems used in industrial process technology
Part 1: Methods for evaluating the operating behavior
DIN 16086:
Electrical pressure measuring devices, pressure sensors, transmitters, pressure measuring devices
Terms, specifications in data sheets
EN 61326:
Electrical equipment for control technology and laboratory application ā EMC requirements
To Next Page
Loading...
Need help?
General
