Ecograph T, RSG35 Appendix
Endress+Hauser 117
Description Condition description when the digital input is active. This text is both shown in the
display and saved to memory.
Only visible if function = control input, on/off event, event+operation time.
User entry Text (max. 6 characters)
Factory setting On
Description 'L'
Navigation Expert → Inputs → Digital inputs → Digital input x → Description 'L'
Direct access code: 250008-00x
Examples: Digital input 1: 250008-000; Digital input 6: 250008-005
Description Condition description when the digital input is not active. This text is both shown in the
display and saved to memory.
Only visible if function = control input, on/off event, event+operation time.
User entry Text (max. 6 characters)
Factory setting Off
Save event
Navigation Expert → Inputs → Digital inputs → Digital input x → Save event
Direct access code: 250009-00x
Examples: Digital input 1: 250009-000; Digital input 6: 250009-005
Description Determines whether the condition change from low to high or high to low is stored in the
event log.
Requires higher memory capacity.
Only visible if function = control input, on/off event, event+operation time.
Options No, Yes
Factory setting Yes
Event message
Navigation Expert → Inputs → Digital inputs → Digital input x → Event message
Direct access code: 250018-00x
Examples: Digital input 1: 250018-000; Digital input 6: 250018-005
To Next Page
Loading...