Appendix Ecograph T, RSG35
118 Endress+Hauser
Description "Do not acknowledge": No message is shown if the digital input switches.
"Acknowledge": A message window is shown on the screen which has to be acknowledged
by operating a push button.
Only visible if function = control input, on/off event, event+operation time.
Options Do not acknowledge, Acknowledge
Factory setting Do not acknowledge
Event text L->H
Navigation Expert → Inputs → Digital inputs → Digital input x → Event text L->H
Direct access code: 250010-00x
Examples: Digital input 1: 250010-000; Digital input 6: 250010-005
Description Description of condition change from low to high. Event text is stored (e.g. Start filling).
If no event text is set, the device generates an automatic event text (factory setting),
e.g. digital 1 L->H.
Only visible if function = control input, on/off event, event+operation time.
User entry Text (max. 22 characters)
Event text H->L
Navigation Expert → Inputs → Digital inputs → Digital input x → Event text H->L
Direct access code: 250011-00x
Examples: Digital input 1: 250011-000; Digital input 6: 250011-005
Description Description of condition change from high to low. Event text is stored (e.g. Stop filling).
If no event text is set, the device generates an automatic event text (factory setting),
e.g. digital 1 H->L.
Only visible if function = control input, on/off event, event+operation time.
User entry Text (max. 22 characters)
Record duration
Navigation Expert → Inputs → Digital inputs → Digital input x → Record duration
Direct access code: 250012-00x
Examples: Digital input 1: 250012-000; Digital input 6: 250012-005
To Next Page
Loading...
Need help?
General