Ecograph T, RSG35 Appendix
Endress+Hauser 125
Description The Web server communicates through this communication port.
If your network is protected by a firewall, this port may have to be enabled.
Please contact your network administrator if this is the case.
User entry Number (max. 5 digits)
Factory setting 80
Setup
Navigation Expert → Communication → Ethernet → Configuration Web server → Setup
Direct access code: 470001-000
Description The device can be configured via Web server.
For security reasons it is advisable to switch off configuration via the Web server after
commissioning.
With regard to IT security please contact your network administrator if necessary.
Options No, Yes
Factory setting Yes
Firmware update
Navigation Expert → Communication → Ethernet → Configuration Web server → Firmware
update
Direct access code: 470002-000
Description Firmware can be updated via Web server.
Options No, Yes
Factory setting No
Remote control
Navigation Expert → Communication → Ethernet → Configuration Web server → Remote
control
Direct access code: 470004-000
Description Remote control of the device is possible via Web server.
Options No, Yes
Factory setting No
To Next Page
Loading...