Appendix Ecograph T, RSG35
138 Endress+Hauser
Navigation Expert → Application → Maths → Maths x → Switches relay
Direct access code: 400007-000
Examples: Maths 1: 400007-000; Maths 4: 400007-003
Description Switches the respective relay when the digital input is low or high.
Only visible if the result is = control input or state.
Options Not used, Relay x
All the available relays are displayed
Factory setting Not used
Description 'H'
Navigation Expert → Application → Maths → Maths x → Description 'H'
Direct access code: 400008-00x
Examples: Maths 1: 400008-000; Maths 4: 400008-003
Description Condition description when the digital input is active. This text is both shown in the
display and saved to memory.
Only visible if the result is = control input or state.
User entry Text (max. 6 characters)
Factory setting On
Description 'L'
Navigation Expert → Application → Maths → Maths x → Description 'L'
Direct access code: 400009-00x
Examples: Maths 1: 400009-000; Maths 4: 400009-003
Description Condition description when the digital input is not active. This text is both shown in the
display and saved to memory.
Only visible if the result is = control input or state.
User entry Text (max. 6 characters)
Factory setting Off
Save event
Navigation Expert → Application → Maths → Maths x → Save event
Direct access code: 400010-00x
Examples: Maths 1: 400010-000; Maths 4: 400010-003
To Next Page
Loading...