Ecograph T, RSG35 Appendix
Endress+Hauser 139
Description Determines whether the condition change from low to high or high to low is stored in the
event log.
Requires higher memory capacity.
Only visible if the result is = control input or state.
Options No, Yes
Factory setting Yes
Event message
Navigation Expert → Application → Maths → Maths x → Event message
Direct access code: 400018-00x
Examples: Maths 1: 400018-000; Maths 4: 400018-003
Description "Do not acknowledge": No message is shown if the state of the mathematics channel
changes.
"Acknowledge": A message window is shown on the screen which has to be acknowledged
by operating a push button.
Only visible if the result is = control input or state.
Options Do not acknowledge, Acknowledge
Factory setting Do not acknowledge
Event text L->H
Navigation Expert → Application → Maths → Maths x → Event text L->H
Direct access code: 400011-00x
Examples: Maths 1: 400011-000; Maths 4: 400011-003
Description Description of condition change from low to high. Event text is stored (e.g. Start filling).
Only visible if the result is = control input or state.
User entry Text (max. 22 characters)
Event text H->L
Navigation Expert → Application → Maths → Maths x → Event text H->L
Direct access code: 400012-00x
Examples: Maths 1: 400012-000; Maths 4: 400012-003
Description Description of condition change from high to low. Event text is stored (e.g. Stop filling).
Only visible if the result is = control input or state.
To Next Page
Loading...
Need help?
General