Appendix Ecograph T, RSG35
140 Endress+Hauser
User entry Text (max. 22 characters)
Record duration
Navigation Expert → Application → Maths → Maths x → Record duration
Direct access code: 400013-00x
Examples: Maths 1: 400013-000; Maths 4: 400013-003
Description The duration between "On" and "Off" can be recorded. The duration is appended to the "Off"
event text (<hhhh>h<mm>:<ss>).
Power failure times do not affect the duration. If the digital channel was "on" before the
power failure and is still "on" after the power failure, the duration continues.
Only visible if the result is = control input or state.
Options No, Yes
Factory setting No
Zoom start
Navigation Expert → Application → Maths → Maths x → Zoom start
Direct access code: 400016-00x
Examples: Maths 1: 400016-000; Maths 4: 400016-003
Description If the whole value range is not used, you can configure the lower value of the required
section here. Zooming does not affect the save function.
Only visible if the result is = instantaneous value.
User entry Number (max. 8 digits)
Factory setting 0
Zoom end
Navigation Expert → Application → Maths → Maths x → Zoom end
Direct access code: 400017-00x
Examples: Maths 1: 400017-000; Maths 4: 400017-003
Description Like "Zoom start". However, enter the upper value of the required range here.
Only visible if the result is = instantaneous value.
User entry Number (max. 8 digits)
Factory setting 100
To Next Page
Loading...