Appendix Ecograph T, RSG35
162 Endress+Hauser
Description Enter the e-mail address of the device here (this text appears as the sender of the e-mail).
If necessary, contact your network administrator or e-mail provider.
If a valid e-mail address is not configured this might cause e-mail transmission
problems, depending on the particular provider.
User entry Text (max. 60 characters)
User name
Navigation Expert → Application → E-mail → User name
Direct access code: 510066-000
Description Configure the user name of the e-mail account here. If necessary, contact your network
administrator or e-mail provider.
User entry Text (max. 60 characters)
Password
Navigation Expert → Application → E-Mail → Password
Direct access code: 510067-000
Description Enter the password for authentication here. If necessary, contact your network
administrator or e-mail provider.
User entry Text (max. 22 characters)
"E-mail addresses" submenu
Navigation Expert → Application → E-mail → E-mail addresses
Description Here, enter all the e-mail addresses messages should be sent to in the event of an alarm.
Assignment to the alarms is performed later on.
E-mail address x
Navigation Expert → Application → E-mail → E-mail addresses → E-mail address x
Direct access code:
E-mail address 1: 510080-000
...
E-mail address 5: 510084-000
To Next Page
Loading...