Ecograph T, RSG35 Appendix
Endress+Hauser 163
Description Here, enter an e-mail address a message should be sent to.
Assignment to the alarms is performed later on.
User entry Text (max. 60 characters)
"Limit value violations" submenu
Navigation Expert → Application → E-mail → Limit value violations
Description Specify who should receive e-mails when limit value violations occur (both on and off
messages).
Only for limit values where "Save message" is set to "Yes".
Recipient x
Navigation Expert → Application → E-mail → Limit value violations → Recipient x
Direct access code:
Recipient 1: 510110-000; Recipient 2: 510111-000
Description Select who should receive the e-mail.
Options Not used, E-mail address x
Factory setting Not used
"On/off messages" submenu
Navigation Expert → Application → E-mail → On/off messages
Description Specify who should receive e-mails when "on"/"off" messages occur (for digital inputs or
maths channels).
Only for inputs where "Save message" is set to "Yes".
Recipient x
Navigation Expert → Application → E-mail → On/off messages → Recipient x
Direct access code:
Recipient 1: 510115-000; Recipient 2: 510116-000
Description Select who should receive the e-mail.
Options Not used, E-mail address x
To Next Page
Loading...