Endress+Hauser Hart Proline Promag P 500 - Page 137

Proline Promag P 500 HART Operation
Endress+Hauser 137
Corrected volume flow
→  137
Flow velocity
→  137
Conductivity
→  137
Corrected conductivity
→  137
Temperature
→  138
Density
→  138
Parameter overview with brief description
Parameter Prerequisite Description User interface
Volume flow – Displays the volume flow currently
measured.
Dependency
The unit is taken from the Volume flow
unit parameter (→  97).
Signed floating-point
number
Mass flow – Displays the mass flow currently
calculated.
Dependency
The unit is taken from the Mass flow
unit parameter (→  97).
Signed floating-point
number
Corrected volume flow – Displays the corrected volume flow
currently calculated.
Dependency
The unit is taken from the Corrected
volume flow unit parameter
(→  97).
Signed floating-point
number
Flow velocity – Displays the flow velocity currently
calculated.
Signed floating-point
number
Conductivity – Displays the conductivity currently
measured.
Dependency
The unit is taken from the Conductivity
unit parameter (→  97).
Signed floating-point
number
Corrected conductivity One of the following conditions is met:
• Order code for "Sensor option", option
CI "Medium temperature
measurement"
or
• The temperature is read into the
flowmeter from an external device.
Displays the conductivity currently
corrected.
Dependency
The unit is taken from the Conductivity
unit parameter (→  97).
Positive floating-point
number