Endress+Hauser Hart Proline Promag P 500 - Page 140

Operation Proline Promag P 500 HART
140 Endress+Hauser
‣
Pulse/frequency/switch output
1 to n
→  140
‣
Relay output 1 to n
→  141
‣
Double pulse output
→  141
Output values of current output
The Value current output submenu contains all the parameters needed to display the
current measured values for every current output.
Navigation
"Diagnostics" menu → Measured values → Output values → Value current output 1 to n
‣
Current output 1 to n
Output current 1 to n
→  140
Measured current 1 to n
→  140
Parameter overview with brief description
Parameter Description User interface
Output current 1 Displays the current value currently calculated for the current
output.
3.59 to 22.5 mA
Measured current Displays the current value currently measured for the current
output.
0 to 30 mA
Output values for pulse/frequency/switch output
The Pulse/frequency/switch output 1 to n submenu contains all the parameters needed
to display the current measured values for every pulse/frequency/switch output.
Navigation
"Diagnostics" menu → Measured values → Output values → Pulse/frequency/switch output
1 to n
‣
Pulse/frequency/switch output
1 to n
Output frequency 1 to n
→  141
Pulse output 1 to n
→  141
Switch status 1 to n
→  141