Endress+Hauser Hart Proline Promag P 500 - Page 141

Proline Promag P 500 HART Operation
Endress+Hauser 141
Parameter overview with brief description
Parameter Prerequisite Description User interface
Output frequency 1 to n In the Operating mode parameter, the
Frequency option is selected.
Displays the value currently measured
for the frequency output.
0.0 to 12 500.0 Hz
Pulse output 1 to n In the Operating mode parameter, the
Pulse option is selected.
Displays the pulse frequency currently
output.
Positive floating-point
number
Switch status 1 to n The Switch option is selected in the
Operating mode parameter.
Displays the current switch output
status.
• Open
• Closed
Output values for relay output
The Relay output 1 to n submenu contains all the parameters needed to display the
current measured values for every relay output.
Navigation
"Diagnostics" menu → Measured values → Output values → Relay output 1 to n
‣
Relay output 1 to n
Switch status
→  141
Switch cycles
→  141
Max. switch cycles number
→  141
Parameter overview with brief description
Parameter Description User interface
Switch status Shows the current relay switch status. • Open
• Closed
Switch cycles Shows number of all performed switch cycles. Positive integer
Max. switch cycles number Shows the maximal number of guaranteed switch cycles. Positive integer
Output values for double pulse output
The Double pulse output submenu contains all the parameters needed to display the
current measured values for every double pulse output.
Navigation
"Diagnostics" menu → Measured values → Output values → Double pulse output
‣
Double pulse output
Pulse output
→  141
Parameter overview with brief description
Parameter Description User interface
Pulse output Shows the currently output pulse frequency. Positive floating-point number