Endress+Hauser iTEMP TMT82 - Page 87

iTEMP TMT82 Operating menu and parameter description
Endress+Hauser 87
Display Hours (h)
13.2.1 "Diagnose list" submenu
Up to 3 diagnostic messages currently pending are displayed in this submenu. If more than
3 messages are pending, the messages with the highest priority are shown on the display.
Information on diagnostics measures in the device and an overview of all the diagnostics
messages →  37.
Actual diagnostics count
Navigation Diagnostics → Diagnostics list → Actual diagnostics count
Expert → Diagnostics → Diagnostics list → Actual diagnostics count
Description Use this function to display the number of diagnosis messages currently pending in the
device.
Actual diagnostics
Navigation Diagnostics → Diagnostics list → Actual diagnostics
Expert → Diagnostics → Diagnostics list → Actual diagnostics
Description Use this function to display the current diagnostics messages with the highest priority to
the third-highest priority.
Display Symbol for event behavior and diagnostic event.
Additional information Example for display format:
F261-Electronics modules
Actual diag channel
Navigation Diagnostics → Diagnostics list → Actual diag channel
Expert → Diagnostics → Diagnostics list → Actual diag channel
Description Use this function to display the sensor input to which the diagnostics message refers.
Display • Sensor 1
• Sensor 2
• - - - - - -