Levelflex FMP51, FMP52, FMP54 FOUNDATION Fieldbus Commissioning (block-based operation)
Endress+Hauser 117
Severity of the
event
Default diagnostic category Source of the
event
Bit Events within the group
Configuration 21 S441: Current output 1
Process 20 • S801: Energy too low
• S825: Operating temperature
• S921: Change of reference
• S942: In safety distance
1)
• S943: In blocking distance
• S944: Level range
• S968: Level limited
1) This event can be removed from the group in order to define its behavior individually; see section
"Configurable area".
Severity of the
event
Default diagnostic category Source of the
event
Bit Events within the group
Lowest severity Maintenance required (M) Sensor 19 not used in Levelflex
Elektronics 18 • M270: Main electronics failure
• M272: Main electronics failure
• M311: Electronics failure
Configuration 17 M438: Data set
Process 16 M803: Current loop 1
To Next Page
Loading...
