Operating menu Levelflex FMP51, FMP52, FMP54 FOUNDATION Fieldbus
186 Endress+Hauser
Use calculated DC value
Navigation Setup → Advanced setup → Interface → Use calc. DC
Description Specify whether the calculated dielectric constant is to be used.
Selection • Save and exit
• Cancel and exit
Factory setting Cancel and exit
Additional information Meaning of the options
• Save and exit
The calculated constant is assumed to be the correct one.
• Cancel and exit
The calculated dielectric constant is rejected; the previous dielectric constant remains
active.
On the local display, the Calculated DC value parameter (→ 185) is displayed
together with this parameter.
To Next Page
Loading...
