Endress+Hauser Levelflex FMP54 - Page 233

Levelflex FMP51, FMP52, FMP54 FOUNDATION Fieldbus Operating menu
Endress+Hauser 233
Navigation  Diagnostics → Analog inputs → Analog input 1 to 5
Block tag
Navigation  Diagnostics → Analog inputs → Analog input 1 to 7 → Block tag
Description Defined to be unique throughout the control system at one plant site. The tag may be
changed using the FB_Tag service.
Factory setting
Channel
Navigation  Diagnostics → Analog inputs → Analog input 1 to 7 → Channel
Description Select the process variable.
Selection • Uninitialized
• Level linearized
• Absolute echo amplitude
• Absolute EOP amplitude
• Absolute interface amplitude
*
• Distance
• Electronic temperature
• EOP shift
• Interface linearized
*
• Interface distance
*
• Measured capacitance
*
• Relative echo amplitude
• Relative interface amplitude
*
• Noise of signal
• Terminal voltage
• Thickness upper layer
*
• Calculated DC value
*
• Analog output adv. diagnostics 2
• Analog output adv. diagnostics 1
Factory setting Uninitialized
Status
Navigation  Diagnostics → Analog inputs → Analog input 1 to 7 → Status
Description Indicates the status of the output of the AI block according to the FOUNDATION Fieldbus
specification.
* Visibility depends on order options or device settings