Endress+Hauser Levelflex FMP55 HART - Failure Mode; Invert Output Signal; Switch Status; Switch-Off Delay

Operating menu Levelflex FMP55 HART
158 Endress+Hauser
Switch-off delay 
Navigation  Setup → Advanced setup → Switch output → Switch-off delay
Prerequisite • Switch output function (→  154) = Limit
• Assign limit (→  155) ≠ Off
Description Define switch-off delay.
User entry 0.0 to 100.0 s
Factory setting 0.0 s
Failure mode 
Navigation  Setup → Advanced setup → Switch output → Failure mode
Description Define output behavior in alarm condition.
Selection • Actual status
• Open
• Closed
Factory setting Open
Switch status
Navigation  Setup → Advanced setup → Switch output → Switch status
Description Displays the current state of the switch output.
Invert output signal 
Navigation  Setup → Advanced setup → Switch output → Invert outp.sig.
Description Specify whether the output signal is to be inverted.
Selection • No
• Yes
Factory setting No