Endress+Hauser Levelflex FMP55 HART - Display Damping; Display Interval; Header

Levelflex FMP55 HART Operating menu
Endress+Hauser 163
Display interval
Navigation  Setup → Advanced setup → Display → Display interval
Description Set time measured values are shown on display if display alternates between values.
User entry 1 to 10 s
Factory setting 5 s
Additional information This parameter is only relevant if the number of selected measuring values exceeds the
number of values the selected display format can display simultaneously.
Display damping 
Navigation  Setup → Advanced setup → Display → Display damping
Description Define display reaction time to fluctuations in the measured value.
User entry 0.0 to 999.9 s
Factory setting 0.0 s
Header 
Navigation  Setup → Advanced setup → Display → Header
Description Select header contents on local display.
Selection • Device tag
• Free text
Factory setting Device tag
Additional information
1
XXXXXXXXX
A0013375
1 Position of the header text on the display
Meaning of the options
• Device tag
Is defined in the Device tag parameter (→  111).
• Free text
Is defined in the Header text parameter (→  164).