Endress+Hauser Levelflex FMP55 HART - Measured Values Submenu; Measured Values

Levelflex FMP55 HART Operating menu
Endress+Hauser 179
16.4.4 "Measured values" submenu
Navigation  Diagnostics → Measured val.
Distance
Navigation  Diagnostics → Measured val. → Distance
Description Displays the measured distance D
L
between the reference point (lower edge of the flange
or threaded connection) and the level.
Additional information
D
L
D
L
A0013199
 38 Distance for interface measurements
The unit is defined in the Distance unit parameter (→  111).
Level linearized
Navigation  Diagnostics → Measured val. → Level linearized
Description Displays linearized level.
Additional information • The unit is defined by the Unit after linearization parameter →  135.
• For interface measurements, this parameter always refers to the total level.
Interface distance
Navigation  Diagnostics → Measured val. → Interface dist.
Prerequisite Operating mode (→  111) = Interface or Interface with capacitance