Levelflex FMP55 HART Operating menu
Endress+Hauser 175
16.4.2 "Event logbook" submenu
The Event logbook submenu is only available when operating via the local display.
When operating via FieldCare, the event list can be displayed in the FieldCare
function "Event List / HistoROM".
Navigation Diagnostics → Event logbook
Filter options
Navigation Diagnostics → Event logbook → Filter options
Description Select category (status signal) whose event messages are displayed in the events list.
Selection • All
• Failure (F)
• Function check (C)
• Out of specification (S)
• Maintenance required (M)
• Information (I)
Factory setting All
Additional information • This parameter is only used for operation via the local display.
• The status signals are categorized according to NAMUR NE 107.
"Event list" submenu
The Event list submenu displays the history of past events of the category selected in the
Filter options parameter (→ 175). A maximum of 100 events are displayed in
chronological order.
The following symbols indicate whether an event has occurred or has ended:
• : Event has occurred
• : Event has ended
Information on what is causing the message, and remedy instructions, can be viewed
via the -button.
Display format
• For event messages in category I: information event, event text, "recording event" symbol
and time the event occurred
• For event messages in category F, M, C, S (status signal): diagnostics event, event text,
"recording event" symbol and time the event occurred
Navigation Diagnostics → Event logbook → Event list
To Next Page
Loading...
