SD01189C/07/EN/04.17
Endress+Hauser
46 © Copyright Dec. 2016
Selection:
0: Auto negotiation (default)
1: 10MBps Half duplex
2: 10MBps Full duplex
3: 100MBps Half duplex
4: 100MBps Full duplex
Command for controlling ethernet statistics
Selection:
0: No operation (default)
1: Retransmitt error counters
2: Reset error counters
Dynamic setting of device IP address (DHCP)
Selection:
0: Off
1: On (default)
Webserver activation
Selection:
0: Off
1: On (default)
Setting of byte transmission sequence
Selection:
0: 1-0-3-2 (default)
1: 0-1-2-3
2: 2-3-0-1
3: 3-2-1-0
Device description / TAG
Factory default: E_TextID_DeviceTAGDefault
Controller : set value for controller 0
Controller : proportional band (Xp) for controller 0
Factory default: 10.0
Controller : reset time (Tn) for controller 0
Controller : rate time (Tv) for controller 0
Controller : set value for controller 1
Controller : proportional band (Xp) for controller 1
Factory default: 10.0
Controller : reset time (Tn) for controller 1
Controller : rate time (Tv) for controller 1
Real-Time Clock
Factory default: 2009-01-01T12:00:00