SD01189C/07/EN/04.17
Endress+Hauser
54 © Copyright Dec. 2016
Number of peristaltic sampling volume calibrations
Time stamp of last peristaltic sampling volume calibration
Factory default: 1970-01-01T00:00:00
Calibration method of last peristaltic sampling volume calibration
Selection:
Number of calibrations of temperature sensor 2
Time stamp of last calibration of temperature sensor 2
Factory default: 1970-01-01T00:00:00
Number of calibrations of temperature sensor 3
Time stamp of last calibration of temperature sensor 3
Factory default: 1970-01-01T00:00:00
8.4.2 Sampler Setup (Holding, FC: 03, 16, 23)
Sampling progress
Selection:
0: Waiting (default)
1: Reference run
2: Dist. arm positioned
3: Purge process
4: Suction process
5: Medium detected
6: Dose process
7: sampling Ok
8: sampling nOk
9: Sampling delay
10: Sampling
11: Pre rinsing
12: Post rinsing
13: Launch bottle
14: Sample bottling
15: Emptying bottle
16: Rinsing bottle
17: Draining bottle
Sample volume of manual sampling with peristaltic pump
Factory default: 0.0001
Manual sampling bottle position
Selection:
0: Front (default)
1: Bottle 1
2: Bottle 2
3: Bottle 3
4: Bottle 4
5: Bottle 5
6: Bottle 6
7: Bottle 7
8: Bottle 8
9: Bottle 9
10: Bottle 10
11: Bottle 11
12: Bottle 12
13: Bottle 13
14: Bottle 14
15: Bottle 15
16: Bottle 16
17: Bottle 17
18: Bottle 18
19: Bottle 19
20: Bottle 20
21: Bottle 21
22: Bottle 22
23: Bottle 23
24: Bottle 24