SD01189C/07/EN/04.17
Endress+Hauser
60 © Copyright Dec. 2016
Interval for sample preparation cleaning
Factory default: 1970-01-02T00:00:00
Duration of sample preparation cleaning
Factory default: 1970-01-01T00:01:00
Max. transport time of sample preparation
Factory default: 1970-01-01T00:15:00
Switch on temperature for sample preparation hose heating
Factory default: 5.0
Switch on temperature for outlet sample preparation cabinet heating
Factory default: 5.0
Switch on temperature for inlet sample preparation cabinet heating
Factory default: 10.0
Warn level for sample prepartion filter change
Factory default: 1970-03-02T00:00:00
Warn level for sample prepartion hose change
Factory default: 1970-03-02T00:00:00
Number of consecutive measurements for one channel
Factory default: 1
Limit change filter
Selection:
0: Off (default)
1: On
Limit change hose
Selection:
0: Off
1: On (default)
Timeout no sample
Factory default: 1970-01-01T00:05:00
Timeout no sample (pressurized pipe)
Factory default: 1970-01-01T00:01:00
Filter air cleaning duration
Factory default: 30.0
Filter air cleaning interval
Factory default: 1970-01-01T02:00:00
Filter air cleaning mode
Selection:
0: On (default)
1: Off
Cleaner residence time
Factory default: 1970-01-01T00:01:00
Cleaning discard time
Factory default: 1970-01-01T00:01:30
Pressurized pipe cleaning duration
Factory default: 10.0
Pressurized pipe cleaning discard time
Factory default: 180.0
Start condition of first pressurized pipe cleaning
Selection:
0: On (default)
1: Date/time
2: Off
Interval for pressurized pipe cleaning
Factory default: 1970-01-01T00:30:00
8.5.5 Analyzer Config (Holding, FC: 03, 16, 23)
Current extended ordercode of the device
Index of selected measurement value in measurement
value list
User selectable measurand unit
Factory default: 1