SD01189C/07/EN/04.17
Endress+Hauser
48 © Copyright Dec. 2016
20: Oxygen (opt. Memosens coupling)
21: TU
22: Inline photometer
Serial number of the sensor
Hardware version of connected sensor
Software version of connected sensor
Manufacturer of the sensor
Manufacturing date of the sensor
Initial-operation date of sensor
Min. measured temperature value
Max. measured temperature value
Current sensor-diagnosis : component
Selection:
0: General (default)
1: Temperature Input
2: Binary Input
3: Binary Output
4: Current Input
5: Current Output
6: Relay
7: Memosens Sensor
8: PID Controller
9: Cleaning
10: Limit switch
11: Mathematic Function
12: Binary Input Module
13: Binary Output Module
14: Sample preparation
Current sensor-diagnosis : name of module
Selection:
0: Slot 1 (default)
1: Slot 1
2: Slot 2
3: Slot 3
4: Slot 4
5: Slot 5
6: Slot 6
7: Slot 7
8: Sampler
9: Software
10: Analyzer
Current sensor-diagnosis : port
Current sensor-diagnosis : status according to NAMUR NE107
Bit 0: Failure (F)
Bit 1: Function check (C)
Bit 2: Maintenance (M)
Bit 3: Out of specification (S)
Bit 4-7: Reserved = 0
Current sensor-diagnosis : diagnosis code
Current sensor-diagnosis : time of diagnosis apperance
Number of additional active sensor diagnosis
Past sensor-diagnosis : component
Selection:
0: General (default)
1: Temperature Input
2: Binary Input
3: Binary Output
4: Current Input
5: Current Output
6: Relay
To Next Page
Loading...
