SD01189C/07/EN/04.17
Endress+Hauser
62 © Copyright Dec. 2016
29: Custom
30: Rinsing
31: Rinsing
32: Preparing
Remaining time of current activity
Operating time of filter mat
Operating time of peltier element
Type of sample preparation
Selection:
0: None (default)
1: Conductive
2: Capacitive
Availability of sample preparation
Selection:
0: SP1 (default)
1: SP2
2: SP1 + SP2
SP InstallationType
Selection:
0: Others (default)
1: Pressurized pipe sampling
Time stamp of last calibration
Factory default: 1970-01-01T00:00:00
Calibration method of last calibration
Selection:
0: None (default)
1: Zero point
2: Cal. factor
3: 2-point calibration
4: Application calibration
5: Numeric input zero point
6: Numeric input cal. factor
7: Numeric input appl. cal.
Date of last zero point calibration
Calibration factor of the photometer
Factory default: 1.00
Date of last calibration factor determination
Application calibration active
Internal dilution factor
Factory default: 1
External dilution factor
Factory default: 1.0
SP1: Measured value state
SP1: Date of last measured value
Factory default: 1970-01-01T00:00:00
SP1: Time of last measured value
Factory default: 1970-01-01T00:00:00
SP2: Measured value state
SP2: Date of last measured value
Factory default: 1970-01-01T00:00:00
SP2: Time of last measured value
Factory default: 1970-01-01T00:00:00
To Next Page
Loading...
