Device description Liquistation CSF48
12 Endress+Hauser
3.2 Device architecture
3.2.1 Slot and port assignment
The electronic configuration follows a modular concept:
• Several slots are available for electronics modules.
• These slots are numbered consecutively in the housing. Slots 0 and 1 are always reserved for
the basic module.
• In addition, there are also control module inputs and outputs. These slots are labeled "S".
• Each electronics module has one or more inputs or outputs or relays, referred collectively to
as "ports".
• Ports are numbered consecutively for each electronics module and are automatically
recognized by the software.
a0016633-en
Fig. 6: Slot and port assignment of hardware and on-screen display
To Next Page
Loading...
