Technical data Liquistation CSF48
260 Endress+Hauser
15.13 Mechanical construction
15.13.1 Dimensions
--> "Installation" section
15.13.2 Weight
15.13.3 Material
The plastic material polystyrene VO can discolor if exposed directly to sunlight.
The frame around the window on the stainless steel housing can discolor if exposed directly
to sunlight.
The plastic material ASA+PC V0 is recommended for outdoor installations where a sun
guard is not used.
The discoloring does not affect the function and operation of the device.
CSF48 sampler version Weight
Plastic version without refrigeration 91 kg (201 lbs)
Plastic version with refrigeration 101 kg (223 lbs)
Plastic version without refrigeration and with
fixed castor frame
105 kg (232 lbs)
Stainless steel version with refrigeration 118 kg (260 lbs)
Stainless steel version with stand and
refrigeration
146 kg (322 lbs)
Non-wetted parts
Cabinet housing Plastic polystyrene V0
For standard applications in wastewater treatment plants and
environmental monitoring
Plastic ASA+PC V0
For industrial wastewater treatment plants with an aggressive
atmosphere
Stainless steel V2A (1.4301)
For standard applications in wastewater treatment plants and
environmental monitoring
Stainless steel V4A (1.4571)
For industrial wastewater treatment plants with an aggressive
atmosphere
Sample compartment inner shell Plastic PP
Window Safety glass, coated
Insulation Plastic EPS "Neopor®"
To Next Page
Loading...
