Incoming acceptance and product identification Liquistation CSF48
14 Endress+Hauser
4 Incoming acceptance and product identification
4.1 Incoming acceptance
1. Make sure the packaging is undamaged.
Inform your supplier of any damage to the packaging.
Keep the damaged packaging until any issues have been resolved.
2. Make sure the contents are undamaged.
Inform your supplier of any damage to the contents.
Please keep the damaged goods until any issues have been resolved.
3. Check that the delivery is complete and nothing is missing.
Compare the scope of delivery against the delivery papers and your order.
4. Pack the product in such a way as to protect it reliably against impact and moisture for
storage and transportation.
The original packaging offers the best protection.
Keep to the approved ambient conditions (see "Technical data").
If you have any questions, contact your supplier or your local sales center.
The top of the sampler may be damaged or torn by incorrect transportation
‣ Always use a lifting truck or a fork-lift to transport the sampler. Never lift the sampler by
the top. Lift it in the middle between the upper and lower sections.
4.2 Product identification
4.2.1 Nameplate
Nameplates can be found:
• on the inside of the top door
• On the packaging (adhesive label, portrait format)
The nameplate provides you with the following information on your device:
• Manufacturer ID
•Order code
• Extended order code
• Serial number
• Firmware version
• Input and output values
• Environment
• Activation codes
• Safety notices and warnings
Compare the data on the nameplate with your order.
To Next Page
Loading...
