Liquistation CSF48 Commissioning
Endress+Hauser 69
9.3 Basic setup
Making basic settings
1. Go to the "Setup/Basic setup" menu.
Make the following settings:
2. Device tag: Give your device a name of your choice (max. 32 characters).
3. Set date: Correct the set date if necessary.
4. Set time: Correct the set time if necessary.
5. Number of bottles: Correct the set number of bottles if necessary.
6. Bottle volume: Correct the set bottle volume if necessary.
For quick commissioning, you can ignore the additional settings for outputs, relays etc. You can
make these settings later in the specific menus.
7. Return to the overview by pressing and holding the soft key for "ESC" for at least one second.
Your sampler now works with your general settings.
If you want to configure your most important input and output parameters already in "Basic
setup", proceed as follows:
‣ Configure the current outputs, relays, limit contactors, cleaning cycles and device
diagnostics with the following submenus.
Show summary of current program The bottle statistics for the sampler are displayed. The
statistics appear for each individual bottle after the
program starts.
Further information is provided in the "Bottle statistics"
section.
Show summary of inputs The configured counters of the analog and binary input
are displayed.
Max. 8 lines
1) "%0V" here stands for text that depends on the context. This text is generated automatically by the software and
inserted in place of %0V. In the simplest scenario, this could be the name of the measuring channel, for example.
Path: Menu/Display/Operation
Function Options Info
To Next Page
Loading...
