Endress+Hauser Liquistation CSF48 - Page 68

Commissioning Liquistation CSF48
68 Endress+Hauser
Number of lines 1 to 8
Factory setting
1
Specify the number of measured values displayed.
Line 1
...
Line 8
As the following functions are the same for all the lines,
they are only described once.
Signal type Options
• Source of data
•Output
Factory setting
Source of data
Select a source of data or an output as the signal type.
Source of data
Signal type = "Source
of data"
Options
•None
• Binary input
• Current inputs
• Temperature
• Memosens sensor input
(optional)
• Fieldbus signals
•Mathematical functions
Factory setting
None
Select a binary-, current- or temperature input as the
data source.
Output
Signal type = "Output"
Options
•None
•Binary outputs
• Current outputs
•Relay
Factory setting
None
Select an output. You can choose from binary outputs,
current outputs and relays.
Measured value Options
• Depends on the source of
data or output
Factory setting
None
You can display different measured values depending on
the source of data or output.
Label Customized text,
20 characters
User-defined description for parameter to be displayed
Set label to "%0V"
1)
Action If you perform this action you accept the parameter
name that is automatically suggested.
Your own name ("Label") is lost!
Measurement Current measured values at the inputs are displayed.
Analog and binary inputs cannot be modified here. If
digital sensor inputs are selected they can be configured
here.
Path: Menu/Display/Operation
Function Options Info