Commissioning Liquistation CSF48
66 Endress+Hauser
9 Commissioning
9.1 Function check
Incorrect connection, incorrect supply voltage
Safety risks for staff and incorrect operation of the device
‣ Check that all connections have been established correctly in accordance with the wiring
diagram.
‣ Make sure that the supply voltage matches the voltage indicated on the nameplate.
9.2 Switching on the unit
9.2.1 Configuring operating language
Setting the language, configuring the display
1. Switch on the supply voltage.
Wait for the initialization to complete.
2. Press the soft key for "MENU". Select your language in the top menu item.
3. Go to the "Display/Operation" menu and configure your desired display settings (Contrast,
Backlight and Screen rotation).
You have now changed the display to suit your requirements and can operate the device
in the preferred language.
4. Go to the "Setup/Basic setup" menu and run a quick setup, see "Basic setup" section.
9.2.2 Initial screen
You can find the following menu items and soft keys on the initial screen:
• Select sampling program
• Edit program %0V
1)
• Start program %0V
1)
•MENU
•MAN
•MEAS
•OFF
1) "%0V" here stands for text that depends on the context. This text is generated automatically by the software and
inserted in place of %0V.
To Next Page
Loading...
