Endress+Hauser Liquistation CSF48 - 6 Electrical Connection; Connection Conditions

Liquistation CSF48 Electrical connection
Endress+Hauser 29
6 Electrical connection
WARNING
!
Device is energized
Incorrect wiring can result in injury or fatality
‣ The electrical connection must only be carried out by a certified electrician.
‣ Technical personnel must have read and understood the instructions in this manual and
must adhere to them.
‣ Prior to beginning any wiring work, make sure voltage is not applied to any of the cables.
6.1 Connection conditions
6.1.1 Remote operation via HART (e.g. via HART modem and FieldCare)
a0015608
Fig. 21: HART via modem
1 Base-L, or -E device module: current output 1 with HART
2 HART modem for connecting to PC, e.g. FXA195
1)
3 HART handheld terminal
1) Switch set to "on" (substitutes the resistor)