Endress+Hauser Liquistation CSF48 - Page 216

Diagnostics and troubleshooting Liquistation CSF48
216 Endress+Hauser
12/2011 01.03 Extension
• PROFIBUS DP incl. profile 3.02 supported
• Modbus RTU (RS485) supported
• Modbus TCP supported
• Sampling program control via fieldbus
• Sampling via sampling assembly
• Low-power mode for cooling system
• USP/EP (United States Pharmacopeia and European
Pharmacopeia) and TDS (Total Dissolved Solids) for
conductivity
Improvement
• Adapted factory settings
• SAC: Factory calibration in the field incl. filter operating time
reset and lamp change
• ISFET leak current visible in measuring screen
• Multiselect for limit switch and cleaning cycles
BA00443C/07/EN/15.11
BA00463C/07/EN/15.11
BA00464C/07/EN/15.11
BA00467C/07/EN/15.11
04/2011 01.02 Extension
• Support for additional sensors:
–Chlorine
–ISE
–SAC
–Interface
• HART communication
•Mathematics functions
Improvement
• Modified software structures
• Adapted factory settings
• User-defined measuring screens
BA443C/07/EN/14.11
BA463C/07/EN/14.11
BA464C/07/EN/14.11
BA467C/07/EN/14.11
04/2010 01.00 Original software BA443C/07/EN/04.10
BA463C/07/EN/04.10
BA464C/07/EN/04.10
BA467C/07/EN/04.10
Date Version Changes to software Documentation: edition