Endress+Hauser Liquistation CSF48 - Page 235

Liquistation CSF48 Repair
Endress+Hauser 235
Item No. Designation and contents Order number
Spare parts kit
1 Fastening clips for suction hose, 10 pcs 71113508
2 Internal intake hose, complete, including
110˚ angular piece, 90˚ hose connection nipple, thread adapter nut 1" PP, 2 x fastening
clips, 3 x O-rings
71111048
3 Feedthrough, sample infeed ID 13 with cylinder pin 71110853
4 Dosing pipe 350 ml with O-ring 71110628
5
Glass dosing chamber, 350 ml, with fixing ring and O-ring 71103168
Plastic dosing chamber, 350 ml, with O-ring 71103173
6 Conductive dosing chamber flange, with conductivity sensors, insulation sleeves and
O-ring
71102985
7 Capacitance dosing chamber flange, complete 71103166
8 Dosing chamber inlet with sealing ring, intermediate ring and pipe clamp 71111006
10 Air filter for vacuum pump, 2 pcs
Hose, silicone, 320 mm (12.6")
71103283
Seal set for dosing chamber:
O-ring ID=102.00 W=3.00 OD=108.00 NBR, 1 pc
O-ring ID=15.00 W=2.00 OD=19.00 EPDM, 1 pc
O-ring ID=20.00 W=2.00 EPDM, 1 pc
O-ring ID=18.00 W=2.00 OD=22.00 EPDM, 1 pc
71103176
11 Dosing hose to distributor, 2 pc set.
Dosing hose to distributor, 25 pc set.
71111188
71111189