Endress+Hauser Liquistation CSF48 - Page 243

Liquistation CSF48 Accessories
Endress+Hauser 243
71111199 Kit CSF48: Retrofit kit for flow assembly, without stand; with stand cover V2A; 304(x)
71111200 Kit CSF48: Retrofit kit for flow assembly, without stand; with stand cover V4A; 316(x)
71111205 Kit CSF48: Retrofit kit temperature sensor PT1000
71111206 Kit CSF48: Retrofit kit 1 x digital sensor, Memosens protocol + 2 x output 0/4-20mA (hardware +
software)
71111208 Kit CSF48: Retrofit kit 2 x digital sensor, Memosens protocol + 2 x output 0/4-20mA (hardware +
software)
71111210 Kit CSF48: Retrofit kit 1 x to 2 x digital sensors, Memosens protocol + 2 x output 0/4-20mA (software)
71146969 Kit CSF48: Retrofit kit 2 x digital sensor + 2 x output 0/4-20mA and extension backplane
71136999 Kit CSF48: Retrofit kit service interface (CDI flange connector, counter nut)
71136885 Kit CSF48: Retrofit kit relay (2x + cable set)
71136101 Kit CSF48: Retrofit kit door stop (2x)
71184459 Kit CSF48: Retrofit kit BASE-E module + backplane extension
71207321 Kit CSF48: Sample distribution 24 x 2 liters
71111053 Kit CM442/CM444/CM448/CSF48: Extension module AOR; 2 x relay, 2 x analog output 0/4 to 20 mA
71125375 Kit CM442/CM444/CM448/CSF48: Extension module 2R; 2 x relay
71125376 Kit CM442/CM444/CM448/CSF48: Extension module 4R; 4 x relay
71135632 Kit CM442/CM444/CM448/CSF48: Extension module 2AO; 2 x analog output 0/4 to 20 mA
71135633 Kit CM442/CM444/CM448/CSF48: Extension module 4AO; 4 x analog output 0/4 to 20 mA
71135631 Kit CM444/CM448/CSF48: Extension module 2DS; 2 x digital sensors, Memosens
71135634 Kit CM442/CM444/CM448/CSF48: Extension module 485; Ethernet configuration; extendable to
PROFIBUS DP or Modbus RS485 or Modbus TCP. This requires an additional activation code which can be
ordered separately (see Communication; software).
71135638 Kit CM444/CM448/CSF48: DIO extension module; 2 x digital input; 2 x digital output; auxiliary power
supply for digital output
71135639 Kit CM442/CM444/CM448/CSF48: Extension module 2AI; 2 x analog input 0/4 to 20 mA
71140888 Upgrade kit CM442/CM444/CM448/CSF48; extension module 485; PROFIBUS DP (+ Ethernet
configuration)
71140889 Upgrade kit CM442/CM444/CM448/CSF48; extension module 485; Modbus RS485 (+ Ethernet
configuration)
71140890 Upgrade kit CM442/CM444/CM448/CSF48; extension module 485; Modbus TCP (+ Ethernet
configuration)
71219868 Upgrade kit CM442/CM444/CM448/CM442R/CM444R/CM448R/CSF48; extension module 485;
EtherNet/IP (+ Ethernet configuration)
71140891 Kit CM444/CM448: Upgrade code for 2 x 0/4 to 20 mA for BASE-E
71107456 Kit CM442/CM444/CM448/CSF48: M12 socket for digital sensors; pre-terminated
Retrofit kits