10 Technical data PROline Promass 80
108 Endress+Hauser
Dimensions Promass F: Tri-Clamp connections
Fig. 45: Dimensions Promass F: Tri-Clamp connections
Flange JIS B2238 / 63K: 1.4404/316L, Alloy C-22
Surface roughness (flange): Ra 3.2...6.3
µm
DN A B C G L N S LK U di
8 341 266 75 120 420 4 x Ø19 23 85 12 5.35
15 341 266 75 120 440 4 x Ø19 23 85 12 8.30
25 341 266 75 140 494 4 x Ø23 27 100 22 12.00
40 376 271 105 175 620 4 x Ø25 32 130 35 17.60
50 424 283 141 185 775 8 x Ø23 34 145 48 26.00
80 505 305 200 230 915 8 x Ø25 40 185 73 40.50
100
1)
571 324 247 270 1168 8 x Ø27 44 220 98 51.20
150
1)
740 362 378 365 1528 12 x Ø33 54 305 146 68.90
1)
Not available in Alloy C-22
Tri-Clamp: 1.4404/316L
DN Clamp A B C G L U di
8 1" 341 266 75 50.4 367 22.1 5.35
15 1" 341 266 75 50.4 398 22.1 8.30
25 1" 341 266 75 50.4 434 22.1 12.00
40 1 1/2" 376 271 105 50.4 560 34.8 17.60
50 2" 424 283 141 63.9 720 47.5 26.00
80 3" 505 305 200 90.9 900 72.9 40.50
100 4" 571 324 247 118.9 1128 97.4 51.20
3A version also available (Ra
≤ 0.8 µm/150 grit. Option: Ra ≤ 0.4 µm/240 grit)
1/2" Tri-Clamp: 1.4404/316L
DN Clamp A B C G L U di
8 1" 341 266 75 25.0 367 9.5 5.35
15 1" 341 266 75 25.0 398 9.5 8.30
3A version also available (Ra
≤ 0.8 µm/150 grit. Option: Ra ≤ 0.4 µm/240 grit)
227 187
207 168
C
B
160
A
L
di
G
U
Esc
E
-
+
+1.5
–2.0
+1.5
–2.0
F06-80Fxxxxx-06-00-xx-xx-003
To Next Page
Loading...
