Endress+Hauser Proline Promass 80 - Page 118

10 Technical data PROline Promass 80
118 Endress+Hauser
Dimensions Promass M: Tri-Clamp connections
Fig. 53: Dimensions Promass M: Tri-Clamp connections
Flange JIS B2238 / 63K: 1.4404/316L, titanium
Surface roughness (flange): Ra 3.2...6.3
µm
DN A B C G L N S LK U di
8 301 266 35 120 420 4 x Ø19 23 85 12 5.53
15 305 268 37 120 440 4 x Ø19 23 85 12 8.55
25 312 272 40 140 494 4 x Ø23 27 100 22 11.38
40 332 283 49 175 620 4 x Ø25 32 130 35 17.07
50 351 293 58 185 775 8 x Ø23 34 145 48 25.60
80 385 309 76 230 915 8 x Ø25 40 185 73 38.46
Tri-Clamp: 1.4404/316L
DN Clamp A B C G L U di
8 1" 301 266 35 50.4 367 22.1 5.53
15 1" 305 268 37 50.4 398 22.1 8.55
25 1" 312 272 40 50.4 434 22.1 11.38
40 1 1/2" 332 283 49 50.4 560 34.8 17.07
50 2" 351 293 58 63.9 720 47.5 25.60
80 3" 385 309 76 90.9 801 72.9 38.46
3A version also available (Ra
≤ 0.8 µm/150 grit)
1/2" Tri-Clamp: 1.4404/316L
DN Clamp A B C G L U di
8 1" 301 266 35 25.0 367 9.5 5.53
15 1" 305 268 37 25.0 398 9.5 8.55
3A version also available (Ra
≤ 0.8 µm/150 grit)
F06-80Mxxxxx-06-00-xx-xx-005