Endress+Hauser Proline Promass 80 - Page 151

PROline Promass 80 10 Technical data
Endress+Hauser 151
Dimensions Promass I: DIN 11864-1 Form A connections (couplings)
Fig. 83: Dimensions Promass I: DIN 11864-1 Form A connections (couplings)
Coupling DIN 11864-1 Form A / 3A version
1)
: titanium grade 2
DN A B C G L U di
8
2)
350 291 59 Rd 28 x 1/8" 428 10 8.55
15 350 291 59 Rd 34 x 1/8" 463 16 11.38
15
3)
350 291 59 Rd 34 x 1/8" 602 16 17.07
25 350 291 59 Rd 52 x 1/6" 603 26 17.07
25
3)
377 305 72 Rd 52 x 1/6" 734 26 25.60
40 377 305 72 Rd 65 x 1/6" 731 38 25.60
40
3)
406 320 86 Rd 65 x 1/6" 855 38 35.62
50 406 320 86 Rd 78 x 1/6" 856 50 35.62
1)
3A version (Ra ≤ 0.8 µm/150 grit. Option: Ra ≤ 0.4 µm/240 grit)
2)
DN 8 with DN 10 threaded adapters
3)
DN 15, 25, 40 “FB” = Full bore versions of Promass I
F06-80Ixxxxx-06-00-xx-xx-004