Endress+Hauser Proline Promass 80 - Page 153

PROline Promass 80 10 Technical data
Endress+Hauser 153
Dimensions Promass I: ISO 2853 connections (couplings)
Fig. 85: Dimensions Promass I: ISO 2853 connections (couplings)
Coupling ISO 2853 / 3A version
1)
: titanium grade 2
DN A B C G L U di
8
2)
350 291 59 37.13 435 22.6 8.55
15 350 291 59 37.13 471 22.6 11.38
15
3)
350 291 59 37.13 610 22.6 17.07
25
3)
377 305 72 37.13 744 22.6 25.60
40 377 305 72 50.65 737 35.6 25.60
40
3)
406 320 86 50.65 859 35.6 35.62
50 406 320 86 64.16 856 48.6 35.62
1)
3A version (Ra ≤ 0.8 µm/150 grit. Option: Ra ≤ 0.4 µm/240 grit)
2)
DN 8 with DN 15 threaded adapters as standard
3)
DN 15, 25, 40 “FB” = Full bore versions of Promass I
F06-80Ixxxxx-06-00-xx-xx-006