Endress+Hauser Proline Prowirl 72 - Page 104

11 Operation via FOUNDATION Fieldbus Proline Prowirl 72 FOUNDATION Fieldbus
104 Endress + Hauser
Totalizer -
System Unit
AUTO - OOS Use this function to define the unit for the totalizer.
The suitable units have to be configured depending on the option selected in
the "Totalizer - Assign" function (Page 105) (volume or mass or
standard volume).
Options:
• For function "Totalizer - Assign" = Volume Flow
Metric:
Cubic centimeter  cm³
Cubic decimeter  dm³
Cubic meter  m³
Milliliter  ml
Liter  l
Hectoliter  hl
Megaliter  Ml MEGA
US:
Cubic centimeter  cc
Acre foot  af
Cubic foot  ft³
Fluid ounce  oz f
Gallon  US gal
Million gallon  US Mgal
Barrel  US bbl NORM.FL. (normal fluids)
Barrel  US bbl BEER (beer)
Barrel  US bbl PETROCH.(petrochemicals)
Barrel  US bbl TANK (filling tanks)
Imperial:
Gallon  imp. gal
Mega gallon  imp. Mgal
Barrel (beer: 36.0 gal/bbl)  imp. bbl BEER
Barrel (petrochemicals: 34.97 gal/bbl)  imp. bbl PETROCH.
• For function "Totalizer - Assign" = Calc. Mass Flow
Metric:

Gram  g
Kilogram  kg
Metr
ic ton  t
US:
Ounce  oz
Pound  lb
ton  Ton
• For function "Totalizer - Assign " = Corr. Volume Flow
Metric:
Norm liter  Nl
Norm cubic meter  Nm³
US:
Standard cubic meter  Sm³
Standard cubic feet  Scf
Factory setting
Depends on country (metric system units, Page 121, or US units,
Page 122)




Transducer Block "Totalizer" (Endress+Hauser parameters) / base index 600
Parameter Write access for
operating mode
(MODE_BLK)
Description