Technical data Proline t-mass 65 PROFIBUS DP/PA
112 Endress+Hauser
10.1.10 Mechanical construction
Design / dimensions Dimensions and the fitting lengths of the transmitter and sensor are provided in the separate
"Technical Information" document on the device in question. This can be downloaded as a PDF file
from www.endress.com.
A list of the "Technical Information" documents: ä 116
Weight • Compact version: see table below
• Remote version
– Sensor: see table below
– Wall-mount housing: 5 kg (11 lb)
Weight (SI units)
Weight dimensions in [kg].
* For flanged versions, all values (weight) refer to devices with EN/DIN PN 40 flanges.
Weight (US units)
Weight dimensions in [lb].
* For flanged versions, all values (weight) refer to devices with Cl 150 flanges.
Material Transmitter housing
• Compact housing: powder coated die-cast aluminium
• Wall-mount housing: powder coated die-cast aluminium
• Remote field housing: powder coated die-cast aluminium
Connection housing, sensor (remote version)
Powder coated die-cast aluminium
t-mass F* / DN 15 25 40 50 80 100
Compact version 7.5 8.0 12.5 12.5 18.7 27.9
Remote version (sensor only) 5.5 6.0 10.5 10.5 16.7 25.9
t-mass I / sensor length [mm] 235 335 435 608
Compact version 6.4 6.6 7.0 7.4
Remote version (sensor only) 4.4 4.6 5.0 5.4
t-mass F* / DN [inch] ½" 1" 1½" 2" 3" 4"
Compact version 16.5 17.6 27.5 27.5 41.2 61.5
Remote version (sensor only) 12.1 13.2 23.1 23.1 36.7 57.1
t-mass I / sensor length [inch] 9.25" 13.2" 17.1" 24.0"
Compact version 14.1 14.5 15.4 16.3
Remote version (sensor only) 9.7 10.1 11.0 11.9
To Next Page
Loading...
