Function group
DISPLAY
DISPLAY
DAMPING
Selecting a time constant determines whether the display reacts quickly (small
time constant) or slowly (large time constant) to widely changing flow.
Note!
• Damping is inactivated when set to “zero”.
• The time constant does not affect the response of the current output.
6
max. 2-digit number: 0...99 s
Factory setting:
1 s
DISPLAY FORMAT
In this function you can determine how many significant digits are shown on
the display for the flow rate. Along with the function “DISPLAY DAMPING”,
this serves to stabilize the display with strongly fluctuating flows.
Notes!
• Non-significant digits
in front
of the decimal point are shown as “0”.
• Non-significant digits
after
the decimal point are not shown, while the last
digit displayed is rounded.
• The setting carried out here affects the display only. It does not affect the
accuracy of calculations within the system itself.
6
x.xxxx
(5 significant digits)
x.xxx (4 significant digits)
x.xx (3 significant digits)
LCD CONTRAST
The display contrast can be optimally adjusted to match prevailing operating
conditions on site (e.g. ambient temperature).
Caution!
At minus temperatures (< 0 °C) the visibility of the LCD is no longer assured.
The display contrast is at a maximum if the
6 keys are simultaneously
pressed when starting up the flowmeter.
6
IIIIIIIIIIII...........
Any change in contrast is immediately seen with the adjustable
bar graph.
LANGUAGE
In this function the appropriate language is selected in which all text,
parameters and operating messages are to be displayed.
Note!
English is selected if the
6 keys are simultaneously pressed when starting up
the flowmeter.
6
ENGLISH – DEUTSCH – FRANCAIS – ESPANOL – ITALIANO
NEDERLANDS – DANSK – NORSK – SVENSKA – SUOMI –
BAHASA INDONESIA – JAPANESE (in original alphabet)
Note!
Note!
Caution!
Note!
6 Description of Functions Promag 33
68 Endress+Hauser
To Next Page
Loading...
