Endress+Hauser PROMAG 33 - Page 93

Status message Code Cause Remedy
S: POS. ZERO RET.
ACTIVE
1
Measured value suppression
active. This message has top
priority for Promag 33.
–
S: CURRENT OUTP.
SIMUL. ACTIVE
2
Current simulation active –
S: FREQ. OUTPUT
SIMUL. ACTIVE
3
Frequency simulation active –
S: EPD ADJUSTMENT
RUNNING
27
EPD adjustment in progress
(full / empty pipe adjustment).
–
S: BATCHING IS
RUNNINING
28
Batching in progress until the
selected quantity has been
discharged.
–
Promag 33 7 Trouble-shooting, Maintenance and Repairs
Endress+Hauser 93